How to install 3rd party app on IT82-with SD card

[Akuvox_Neil]

To install 3rd party app on IT82, user needs to prepare a SD card which stores with app’s .apk file.

Insert the SD and do the following steps to finish the installation process:
1. Change the permission mode to Admin mode: Go to Settings->System Info->Version, then press User Permission 10 times and select Admin mode.
2. Install the .apk file: Go to Application->ExplorerMini->External_SD, then double click the .apk file to install.
3. After successfully installed the APP, user can find it under Application.

[Akuvox_Neil]

After installing 3rd party app on IT82, you can do below configuration:
1. In this path: Phone-Key/Display-Third Party APK Control, fill in the corresponding parameters.

1.png

2.png

For example, I test via Chrome app:

3.png

2. In this path: Phone-Key/Display-Interface Display, select the one area to be ‘Custom APK’.

3. Remember to click Submit to save. And you can start testing now, like:
3.1 The 3rd party application icon will replace the application icon in the main interface.
3.2 The 3rd party application will run automatically when IT82 start up.
3.3 The interface will turn back to 3rd party application’s when there is no operations during the intervals.

Note: In the same page, you have to enter a number in the path: Phone-Key/Display-Sense Key-Calling, and then you can save the changes.

4.png

[Micka41]

I don't see the pictures, you use IP adress.

http://192.168.35.49:8080/5.jpg ...

[Akuvox_Shirley]

I don't see the pictures, you use IP adress.

http://192.168.35.49:8080/5.jpg ...

Hi,

We have adjusted these pictures, can you see them now?

Best regards.

[Micka41]

Yes it's good, thanks.

If I install for example CHROME with a site displayed :
- is it possible to leave it in default display?
- will the screen switch from CHROME to CALL automatically and vice versa?
- when a intercom calls, will we have the caller's video before accepting the call?

[Akuvox_Neil]

Hi,

For your questions:
1. Each time, IT82 will turn in Chrome main interface which is defined by its class name.
2. When there is a call coming, IT82 will switch from the Chrome to call interface automatically. After the call ends, IT82 will turn back to main interface, if you configure the 'Turn Back APK Enable' option, after the interval, IT82 will turm back to Chrome interface.
3. Yes, you can configure contacts with intercoms rtsp address to achieve the preview feature. You can refer to IT82's manual.

Thanks

[jsaez]

It is only possible to add one Custom APK to the programmable keys?

[Akuvox_Cathy]

Hi Jsaez,

Yes, only one custom APK.

[znelbok]

Can we have more explanation on Package Name and App Class Name.

I plan to use an custom app but dont know what to enter here based on its name?

This is the app - https://play.google.com/store/apps/deta ... r&hl=en_AU

[Akuvox_Jon]

Hi sir,

We can check the package name and activity name(the app class name you mentioned) with this command：

aapt dump badging <your apk file>

You need to install corresponding environment so that the command works.

For Fullscreen Browser, its package name is: com.xyz.fullscreenbrowser and the activity name is: com.xyz.fullscreenbrowser.BrowserActivity

Best Regards.